INVT Goodrive GD300-19-004G-4, Руководство по эксплуатации

Страница: 187 / 255

Goodrive300-19 series open loop vector inverter special for hosit Basic operation instruction
-186-
Function
code
Name
Function
selection
Function instruction
P00.01 Running command channel 1
Terminal running command
channel (LED flickering)
P00.06 A frequency command 13
Hierarchical multi-step speed
reference
P05.01 S1 terminal function selection 1 Forward rotation operation (FWD)
P05.02 S2 terminal function selection 2 Reverse rotation operation (REV)
P05.03 S3 terminal function selection 7 Fault reset (RET)
P05.04 S4 terminal function selection 61 Hierarchical reference terminal 1
P05.05 S5 terminal function selection 62 Hierarchical reference terminal 2
P05.06 S6 terminal function selection 63 Hierarchical reference terminal 3
P05.07 S7 terminal function selection 60 Joystick zero position signal
P06.03 Relay RO1 output 5 Fault output
P06.04 Relay RO2 output 34 Brake control output
P06.14 AO1 output 0 Running frequency
P06.15 AO2 output 5 Current output
P19.01
Brake and contactor control
selection
0x01 Brake is controlled by inverter
7.16.5 Hierarchical remote control mode
The wiring diagram of hierarchical remote control mode is as follows:
GD300-19 inverter
FWD running
S1
Frequency reference Hierarchical multi-step speed reference
REV running
S2
Fault reset
S3
RO1
Brake output
RO2
Fault output
AO1 Running frequency
AO2
Current output
Hierarchical reference
terminal 1
S4
S5
S6
Hierarchical reference
terminal 2
Hierarchical reference
terminal 3
The mode is used in the case where the digital input is connected to the remote controller or PLC of
hierarchical reference contacts. Set P19.00 to
“4: Hierarchical remote control mode”.
The forward and reverse direction signals of the hoist are given by S1 and S2, and the speed is given