Inovance MD810 Series, Руководство пользователя

Страница: 68 / 155

5 Quick Commissioning
- 66 -
Operation
Para.
No.
Parameter Name Default Commission
28: Length reset
29: Torque control inhibited
31: Reserved
32: Immediate DC injection braking
33: External fault normally closed (NC) input
34: Frequency modification enabled
35: PID operation direction reverse
36: External stop terminal 1
37: Command source switchover terminal 2
38: PID integral disabled
39: Switchover between main frequency reference and preset
frequency reference
40: Switchover between auxiliary frequency reference and preset
frequency
41: Reserved
42: Position lock enabled
43: PID parameter switchover
44: User-defined fault 1
45: User-defined fault 2
46: Speed control/Torque control switchover
47: Emergency stop
48: External stop terminal 2
49: Deceleration DC injection braking
50: Clear the current running time
51: Two-wire control/ Three-wire control switchover
52-53: Reserved
54: Winding diameter
55 to 56: Initial winding diameter
57: Pre-drive
58: Winding/Unwinding switchover
59: Winding diameter calculation disabled
60: Exiting tension mode
61: Speed limit direction
F4-01 DI2 function selection 4
Setting range same as DI1
F4-03 DIO1 function selection 12
Setting range same as DI1
F4-04 DIO2 function selection 13
Setting range same as DI1
If any digital
output is used
Set DO function F5-00 DIO2 output mode selection 0
0: Pulse output (FMP)
1: Digital output (FMR)
F5-01 FMR function selection 0