Inovance MD810 Series, Руководство пользователя

Страница: 110 / 155

Appendix A Parameter Table
- 108 -
Para.
No.
Para. Name Setting Range Default Property
F5-01 FMR output function
selection
0: No function
1: AC drive running
2: Fault output 1
(immediate output in coast to stop
mode, output after stop in decelerate
to stop mode)
3: Frequency-level detection 1
output
4: Frequency reached
5: Zero-speed running (no output at
stop)
6: Motor overload pending
7: AC drive overload pending
8: Set count value reached
9: Designated count value reached
10: Length reached
11: PLC cycle completed
12: Accumulative running time
reached
13: Frequency limited
14: Torque limited
15: Ready for RUN
16: AI1 > AI2
17: Frequency upper limit reached
18: Frequency lower limit reached
(no output at stop)
19: Undervoltage state output
20: Communication setting
23: Zero-speed running 2 (having
output at stop)
24: Accumulative power-on time
reached
25: Frequency-level detection 2
output
26: Frequency 1 reached
27: Frequency 2 reached
28: Current 1 reached
29: Current 2 reached
30: Timing reached
31: AI1 input limit exceeded
32: Drive output load loss
33: Reverse running
34: Zero current state
35: IGBT temperature reached
36: Output current limit exceeded
(To be continued)
0 ☆
F5-02 Relay function
selection
2 ☆