Inovance MD810 Series, Руководство пользователя

Страница: 119 / 155

Appendix A Parameter Table
- 117 -
Para.
No.
Para. Name Setting Range Default Property
F9-14 1st fault type
0: No fault
1: Hardware fault
2: Overcurrent during acceleration
3: Overcurrent during deceleration
4: Overcurrent at constant speed
5: Overvoltage during acceleration
6: Overvoltage during deceleration
7: Overvoltage at constant speed
9: Undervoltage
10: AC drive overload
11: Motor overload
12: Reserved
13: Output phase loss
14: IGBT overheat
15: External device fault
16: Communication fault
17: Reserved
18: Reserved
19: Motor auto-tuning abnormal
20: Encoder/PG card abnormal
21: EEPROM read/write error
22: Motor auto-tuning abnormal
23: Motor short circuit to ground
24: Inter-phase short-circuit
25: Power supply unit fault
26: Accumulative running time
reached
27: User-defined fault 1
28: User-defined fault 2
29: Accumulative power-on time
reached
30: Load loss
31: PID feedback loss during running
42: Speed deviation excessive
43: Motor overspeed
45: Motor overtemperature
80: Fan fault
- ●
F9-15 2nd fault type - ●
F9-16 3rd (latest) fault type - ●
F9-17 Frequency upon 3rd
fault
0.00 to 655.35 Hz 0.00 Hz ●
F9-18 Current upon 3rd fault 0.00 to 655.35 A 0.00 A ●
F9-19
Bus voltage upon 3rd
fault
0.0 to 6553.5 V 0.0 V ●
F9-20 DI status upon 3rd fault 0 to 9999 0 ●
F9-21
Output terminal status
upon 3rd fault
0 to 9999 0 ●