background image

p86

  Ver. 3.003 (24/4/03)

CONCEPT IQ. PLUS  Programmer’s Manual.

11.  INDEX.

ALPHABETICAL INDEX OF TOPICS

Topic

Address

Page

24 Hour Zone Types ...................................................................... 601 to 616 ................ 57
24 Hr Fire Zone (Smoke Detector) Ignore Time .......................... 911 ............................ 71
6 Digit PIN codes ........................................................................... 892 ........................... 66
AC Report Delay ............................................................................ 906 ........................... 70
Access Control ...............................................................................  Pages 4, 8, 17, 29, 32, 35
Activate Walk Test. ........................................................................ 23 .............................. 15
Adding Or Changing A User .......................................................... 401 to 447 ................ 16
Advanced Features Programming .................................................................................... 34
Alarm History. ................................................................................. 12 .............................. 14
Alarms are reported via Dialer. ..................................................... 506 ........................... 46
All Area Siren Off control. .............................................................. 891 ........................... 65
Answer Call. ................................................................................... 27 .............................. 14
Answer Machine (Fax) Bypass ..................................................... 514 ........................... 49
Area 1 (General Area) Client Code .............................................. 521 ........................... 50
Area 2 Client Code ........................................................................ 522 ........................... 50
Area 3 Client Code ........................................................................ 523 ........................... 50
Area 4 Client Code ........................................................................ 524 ........................... 50
Area Entry Delay Programming. ................................................... 531 to 534 ................ 51
Area Exit Delay Programming. ..................................................... 541 to 544 ................ 51
Area Openings/Closings are reported via Dialer. ........................ 506 ........................... 46
Area Programming - Basic ............................................................ 531 to 564 ................ 24
Arming Options .............................................................................. 551 to 554 ................ 52
Auto Disarming Options ................................................................ 559 ........................... 52
Auto Isolate on Arming .................................................................. 890 ........................... 64
Auto-arm ............................................................................................................................. 36
Auto-arm In Home Mode ............................................................... 560 ........................... 53
Auto-arm Pre-warn Time ............................................................... 907 ........................... 70
Auto-disarm ........................................................................................................................ 36
Automatic Battery Testing. ............................................................ 892 ........................... 66
Auxiliaries.  User Auxiliaries .............................................................................................. 41
Auxiliary Actions ............................................................................. 860 to 870 ................ 63, 78
Auxiliary Control and Test. ............................................................ 24 .............................. 15
Auxiliary Event Types .................................................................... 800 to 810 ................ 62, 75
Auxiliary Programming Overview .................................................. 800 to 870 ................ 62
Auxiliary Timer Value ..................................................................... 830 to 840 ................ 63
Auxiliary To Follow A Timezone ......................................................................................... 37

Basic Programming Guide.  1-16 Zone Alarm System. .................................................. 18
Battery Test -Manual. ..................................................................... 26 .............................. 15
Battery Test on Arming. ................................................................. 892 ........................... 66
Battery Testing ................................................................................................................... 37
Battery Testing -Automatic. ........................................................... 892 ........................... 66
Beeper Indications. ............................................................................................................ 7
Bell Squawk on Siren for Wireless Remote Key. ......................... 891 ........................... 65
Call Divert (Call Forwarding) Telephone No. ................................ 502 ........................... 44
Call Forwarding .............................................................................. 891 ........................... 38, 65
Call Un-divert (Cancel Call Forwarding) Telephone No. ............. 503 ........................... 44
Callback For Remote Connect .......................................................................................... 38
Call-back Telephone Number ....................................................... 504 ........................... 45
Client Codes (Contact ID) ............................................................. 521-524 .................... 50
Clock synchronized to 50Hz AC Mains. ....................................... 890 ........................... 64
Computer Connection (Local Port 0 Connection) ............................................................ 38
Concept IQ Programming Key & Flash Interface. ........................................................... 9
Contact ID Event Codes ................................................................ 505 ........................... 80
Contact ID Reporting Format ........................................................ 505 ........................... 45
Counters ......................................................................................... 900 ........................... 69
Data.  Types. ...................................................................................................................... 12
Day Alarm ........................................................................................................................... 38
Day Alarm On/Off. .......................................................................... 11 .............................. 14
Day Alarm Zone Option ................................................................. 651 to 666 ................ 59
Day Alarms To Activate Terminal Beeper ..................................... 891 ........................... 65
Daylight Saving .............................................................................. 590 to 595 ................ 55
Daylight Saving Programming - Basic .......................................... 590 to 595 ................ 22
Daylight Saving Time (DST) Start And End Dates ....................... 590 to 595 ................ 55
Default Users ..................................................................................................................... 6
Defaulting The System .................................................................. 098 ........................... 13, 74
Defer Arming ...................................................................................................................... 39
Delay Siren until Comms complete .............................................. 891 ........................... 65
Delayed Force Arm Zone Type ..................................................... 601 to 616 ................ 57
Delayed Zone Type ........................................................................ 601 to 616 ................ 59
Deleting A User .............................................................................. 401 to 447 ................ 16
Dial Attempts. ................................................................................. 508 ........................... 47
Dialer enabled in Home Mode. ..................................................... 891 ........................... 65
Dialer Lockout Zone Option .......................................................... 651 to 666 ................ 59
Dialer Swinger Shutdown Count ................................................... 914 ........................... 72

Содержание CONCEPT IQ. PLUS































































































Отзывы: