p50
Ver. 3.003 (24/4/03)
CONCEPT IQ. PLUS Programmer’s Manual.
PORT 0 ; PORT 1 : BAUD RATE
0 - 300
1 - 1200
2 - 4800
3 - 9600
CLIENT CODES (CONTACT ID)
A four-digit Client Code is used to identify the system (premises) to the Central Station and must be programmed if the system is reporting
in the “Contact ID” format. (See Address 505. Reporting Format)
The Client Code will be supplied by the Central Station and is programmed as a Sequential number of 4 digits.
Single Area system. Only one Client Code is required, and this is programmed as the “General Area / Area 1 Client Code”.
Multi-Area system.
-If a common Client Code is to be used for all Areas in use, only program the “General Area / Area 1 Client Code”.
-If unique Client Codes are required for each Area, the Client Code must be programmed separately for every Area
that is used.
GENERAL AREA / AREA 1 CLIENT CODE
This is the 4 digit Client Code that will be used for:
Single Area systems.
Area 1 or General Open/Close reporting in Multi-Area systems.
AREA 2 CLIENT CODE
This is the 4 digit Client Code used for Area 2 (blank by default) in Multi-Area systems when reporting to a Central Monitoring Station in
Contact ID format. If no Client Code is programmed for Area 2, the Area 1 Client Code will automatically be used.
AREA 3 CLIENT CODE
This is the 4 digit Client Code used for Area 3 (blank by default) in Multi-Area systems when reporting to a Central Monitoring Station in
Contact ID format. If no Client Code is programmed for Area 3, the Area 1 Client Code will automatically be used.
AREA 4 CLIENT CODE
This is the 4 digit Client Code used for Area 4 (blank by default) in Multi-Area systems when reporting to a Central Monitoring Station in
Contact ID format. If no Client Code is programmed for Area 4, the Area 1 Client Code will automatically be used.
516 ; 518
519-520
521
522
523
524
3 - 9600
Spare
(Value Data)
9999
ADDRESS
DEFAULT
FUNCTION
(Data Type)
