Inner Range CONCEPT IQ. PLUS Скачать руководство пользователя

Страница: 37 / 94

Ver. 3.003

p37

CONCEPT IQ. PLUS Programmer’s Manual.

BATTERY TESTING

1) If Automatic Battery Testing is required, Enable Option 2 in “General Options 3”.

NEXT 892

2) If Battery Testing on Area Arming is required, Enable Option 3 in “General Options 3”.

NEXT 892

AUXILIARY TO FOLLOW A TIMEZONE

Program a TimeZone.

1) Choose a TimeZone to Program.
2) Program a “Start Time”. This is the time that the Auxiliary will be activated.

Program the Start Hour.

NEXT 750 (TZ1), 755 (TZ2), 760 (TZ3), 765 (TZ4)

Program the Start Minute.

NEXT 751 (TZ1), 756 (TZ2), 761 (TZ3), 766 (TZ4)

3) Program an “End Time”. This is the time that the Auxiliary will be reset.

Program the End Hour.

NEXT 752 (TZ1), 757 (TZ2), 762 (TZ3), 767 (TZ4)

Program the End Minute.

NEXT 753 (TZ1), 758 (TZ2), 763 (TZ3), 768 (TZ4)

4) Assign the Days-of-the-Week when the TimeZone will operate.

1 - Sun.

2 - Mon.

3 - Tues.

4 - Wed

5 - Thurs

6 - Fri.

7 - Sat.

8 - Hol.

NEXT 754 (TZ1), 759 (TZ2), 764 (TZ3), 769 (TZ4)

Program any Holidays required to Qualify the TimeZone

Any Days when Auxiliary Control is not to occur, when the TimeZone would normally be Valid, must be programmed as Holidays.
Program the Holiday Month (0 - 12) and the Holiday Date (0 - 31) for up to 10 Holidays.

Program the Auxiliary Output.

1) Choose the Auxiliary to control and select the Event Type.

NEXT 801 (Aux 1), to 810 (Aux 10)

71 - Follow TZ1.

72 - Follow TZ2.

73 - Follow TZ3.

74 - Follow TZ4.

2) Program an Auxiliary Timer value for the selected Auxiliary if required.

NEXT 831 (Aux 1), to 840 (Aux 10)

(If any of the Auxiliary Actions from 2 to 13 are to be assigned)

3) Assign the “Auxiliary Action” for the selected Auxiliary.

NEXT 861 (Aux 1), to 870 (Aux 10)

0 - Follow Event Status.

1 - Invert Event Status.

2 - One-shot timed in Seconds.

3 - One-shot timed in Minutes. etc.

Full details of all Auxiliary Actions are provided in Section 10 -”Tables” on page 71.

CALLBACK FOR REMOTE CONNECT

1) Program the Callback Telephone Number.

NEXT 504

2) Select Option 2 - “Remote Connect with Callback” in the Remote Connect Options.

NEXT 512

Содержание CONCEPT IQ. PLUS































































































Результаты поиска

Содержание CONCEPT IQ. PLUS

Отзывы:

Похожие инструкции для CONCEPT IQ. PLUS

Бренды по названию

Популярные бренды

Inner Range CONCEPT IQ. PLUS, Руководство программиста

Результаты поиска

Содержание CONCEPT IQ. PLUS

Отзывы:

Похожие инструкции для CONCEPT IQ. PLUS

Бренды по названию

Популярные бренды