Ver. 3.003
p43
CONCEPT IQ. PLUS Programmer’s Manual.
9. PROGRAMMING REFERENCE.
FUNCTION
USER PROGRAMMING.
There are 48 Users in the system:
USER 1
Installer.
USER 2
Master User.
USERS 3 to 95
Normal Users.
USER 96
Reserved for system functions (e.g. Reporting, Auto arming, etc).
Installer Code.
As all Installer Permissions are pre-defined and do not need to be changed, the Installer User Type and Areas cannot
be edited. The Installers PIN Code should be changed as soon as possible after installation. When choosing a new Installer PIN Code,
ensure that a PIN code is chosen that will not be forgotten, while still providing security against unauthorised access.
Add/Change/Delete Users. To edit other Users, an Installer Code or Master User Code must be used.
See details below or refer to the User’s Manual.
PIN Code Length:
The PIN Code length is selected at Address 892 (General Options 3), Option 1.
A length of 4 or 6 digits may be selected and applies to all User PIN Codes in the system. The default setting is 4 Digits.
User Programming: Each User programmed into the system is assigned a PIN Code, the Areas that they are allowed to control and a User
Type. If the system has one or more Wireless Remote Keys, each Remote Key must also be assigned to a User.
For Details of User Programming refer to “Master User Operations - User Programming” on Page 15.
TELEPHONE NUMBER PROGRAMMING
One or more Telephone numbers will need to be programmed when any of the following functions are required:
•
When the system is required to report to a Central Monitoring Station. (“Contact ID” reporting format)
•
When the system is required to report to a Telephone. (“Domestic Dialer” reporting format)
•
When the system is required to Callback a PC that is dialling in for Remote connection.
•
When the Call Divert function is required.
Telephone numbers are programmed as a Sequential number of up to 16 digits.
The system will automatically move on the next Telephone number to program when the <ENTER> key is pressed.
If you are programming more than one telephone number, this eliminates the need to select the Address of the next number to program.
ADDRESS
401-495
401
402
403-495
500-504
DEFAULT
(Data Type)
(Value Data)