manualshive.com logo in svg

Ingersoll-Rand CENTAC, Техническое справочное руководство

Поделиться
Скачать
Ingersoll-Rand CENTAC Скачать руководство пользователя страница 11

CMC TECHNICAL REFERENCE MANUAL

1X36003 Version 2.52

 1996-1999 Ingersoll-Rand Company

Date of Issue: 18-Oct-1999

1

What’s New In This Manual

This is the third version of the CMC Manual. This version was created to support new
features incorporated into the CMC Product, and provide additional information in general
compared with the first and second versions.

Specifically, new features are as follows:

1.  The basic compressor control logic has been refined to give even better pressure

control than before.

2.  Surge Absorber

TM

. This feature replaces Surge Reload and reduces the magnitude and

duration of pressure variations for a surge cycle.

3.  Gas and steam turbine driven compressor control with Adaptive Starting

TM

 now

available as a standard option.

4.  Diesel driven compressor control with Adaptive Starting

TM

 now available as a standard

option.

5.  Event log has been expanded to 224 events all scrollable from the OUI. New events

have been added for surge, turbine operation, multiple board failure and control
parameter edits from both local or remote control locations. This added information is
invaluable for troubleshooting.

6.  Allen-Bradley DF1 communication protocol has been added for connection to Data

Highway Plus (DH+) networks.

7.  More data available is available at a faster rate from a single communication read.

8.  Three module support. This allows systems to contain as many as 69 analog inputs, 3

CT inputs, 3 speed inputs, 12 analog outputs, 48 discrete inputs and 48 discrete
outputs.

9.  Added math capabilities allow for more options.

10. The OUI has been updated to enhance the overall look and feel and ease of use. The

Coasting Timer and BCM Version have been added.

11. New fonts have been added for Russian, Arabic and Greek.

12. New diagnostic feature for Motor Failure Trip. This helps in troubleshooting compressor

starting problems.

13. Derivative constants for the Inlet Valve Pressure, MinLoad and MaxLoad PID control

loops along with the Bypass Valve Pressure PID control loops have been added to the
OUI, this feature provides a higher level of tuning capabilities for the knowledgeable
User.

Содержание CENTAC


















































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды