IDS IDS-iSYS, Руководство пользователя

Страница: 189 / 263

A-5- Sample barcode symbology managed by the system
!
It is recommended to use a symbology containing a check character.
! Calibrators and controls are automatically identified using a 12 digit barcode.
When possible, avoid 12 digit identification for samples.
Barcode symbology recognized by the reader
•
Code 128
•
Code 39
•
Codabar
•
EAN/UPC
•
Interleaved 2 of 5
Reader programming possibilities
Depending of the barcode symbology, the following elements can be programmed.
This programming can be done on demand by Technical Service.
Check digit
Min number
of characters
Max number
of characters
Interleaved 2 of 5
yes yes yes
Code 128
no yes yes
Code 39
yes yes yes
Codabar
no yes yes
EAN/UPC
yes no no
Recommendations
•
The barcode should contain at least 5 digits for the removable rack configuration (sample tubes identified by
the barcode reader integrated into the sample compartment) or at least 4 digits (except if Interleaved 2of 5)
for the fixed tray configuration (sample tubes identified by the barcode reader in the front of the analyser).
•
The barcode must not contain more than 32 digits. The character «%» must not be used .
•
The height of the barcode should not be less than 10 mm
•
The barcode symbol should be placed at the center of the area between 20 mm above the bottom of the
tube and 14 mm below the top of the tube, excluding the cap.
•
The label should be placed with the bars perpendicular to the axis of the tube.
Appendices
IDS-iSYS User Manual - Revision M1
Appendix A-5
A 7
Software version V 14