IDS IDS-iSYS, Руководство пользователя

Страница: 18 / 263

For the fixed-tray configuration, each position is equipped with a detection sensor. Samples are identified by
the barcode reader (on the front) prior to loading the sample, or manually programmed after sample loading.
For the removable-tray configuration, the tray and each of its positions are identified when loading by the
integrated barcode reader.
IDS
Site de POUILLY
Specifications:
Rack Sample Module
Revision: 0 Page : 8/
20
Embedded software has to be extended with direct LED commande order, a GUI detection method (based on question
intervalle time out) and a possibility to grab all known tests and set LEDs.
4.2 Mechanical views of mock up:
Configuration with removable sample trays
The reagent cartridges are stored in the refrigerated reagent compartment between 12 and 15°C while the
analyser is operating and between either 8 and 10°C or 12 and 15°C in standby mode (depending on the
analyser configuration).
Depending on the configuration of the analyser, up to 15 Immunoassay parameters can be programmed
simultaneously or up to 36 Biochemistry parameters or a combination of both, up to the maximum number of
positions available.
For Immunoassays, the analyser only uses reagents supplied by IDS and its partners. For Biochemistry, it is
possible to use reagents available from suppliers other than IDS, however these reagents will not be managed
using the barcode system, and the information required for traceability must be manually programmed by the
operator.
When Biochemistry regents available from third-party suppliers are used, IDS takes no responsibility for the
validity of results obtained. It is the responsibility of the operator to ensure any non-IDS reagents are optimised
and validated for use on the analyser.
Operating principle
1-2- General Overview (continued)
IDS-iSYS User Manual - Revision M1
Operating principle 1-2
5
Software version V 14