IDS IDS-iSYS, Руководство пользователя

Страница: 163 / 263

5-5- Analyser Cleaning
!
Do not use any spray products on the analyser .
The cleaning and decontamination process for the parts of the analyser protected by the lid is described in
5-2- Weekly Maintenance
, page 118 and following.
The analyser bodywork can be cleaned with absorbent paper soaked in de-ionised water. If necessary, use a
neutral, phosphate free detergent suitable for medical devices, diluted as recommended by the supplier, to
clean traces on the bodywork.
The external side of the lid can be cleaned with absorbent paper soaked in de-ionised water.
!
Do not clean the internal side of the lid.
Decontaminate the bodywork and the lid (internal and external sides) with a disinfectant wipe/solution suitable
for medical devices.
For the internal side of the lid:
•
Open the lid and insert the lid support tool (see pages 35 and 36).
•
Switch o ff the analyser.
•
Decontaminate the internal side of the lid with a disinfectant wipe/solution suitable for medical devices.
!
Do not touch the lock spring.
A slight touch on this spring releases the locking mechanism and prevents the lid closing.
In this case, switch o
ff the analyser and push the lock axis back into its housing.
In case of hazardous material accidental spillage into or onto the analyser, decontaminate with a disinfectant
wipe/solution suitable for medical devices.
The following products cannot be used for cleaning or decontamination of the analyser:
•
Strong or weak acids
•
Bases
•
Pure alcohol
•
Solvents (ether, White Spirit, gasoline)
•
Ammonia
•
Chlorine
•
Bleach
•
Benzene
!
If there is any doubt about using a particular product, contact Technical Services.
Maintenance
5-5- Analyser Cleaning
IDS-iSYS User Manual - Revision M1
Maintenance 5-5
146
Software version V 14