IDS IDS-iSYS, Руководство пользователя

Страница: 62 / 263

3-3-1- Installation of internal ancillary reagents
Description Field
IDS-iSYS Trigger A Immunoassay.
IDS-iSYS Trigger B Immunoassay.
WARNING:
OPENING/CLOSING THE LID
The lid must be opened for this operation.
Always handle the lid carefully during opening and closing.
The lid must always be fully open and the lid support tool must always be installed.
Take care not to knock the lid during any analyser intervention.
When the lid is not fully open there is a risk of it falling.
During closing, maintain the lid open when removing the lid support tool, to avoid any
risk of accidental falling.
•
Open the lid and insert the lid support tool (see pages 35 and 36).
•
Remove the cap from the new ancillary reagent container.
•
If necessary, take out the bung and remove the empty container.
•
Scan the ancillary with the barcode reader.
The analyser will beep for the first time.
•
Within 10 seconds, install the new bottle in its position identified by colour code.
•
Install the supply line into the bottle.
The analyser will beep a second time.
•
If the barcode is not read by the barcode reader, click on the ancillary reagent then use the keyboard to enter
the identifier.
•
Remove the lid support tool and close the lid (see page 36).
•
Once the new bottles are installed, a message proposing an automatic priming is displayed:
•
Click on to confirm the priming of the product(s).
The analyser starts the priming sequence.
Comment: The automatic priming can be cancelled by clicking on . In this case, the priming will
take place automatically when starting a run cycle.
!
Refer to the catalogue for the product references of the ancillary reagents to be ordered.
Use
3-3- Installation of Ancillary Reagents (continued)
IDS-iSYS User Manual - Revision M1
Use 3-3
47
Software version V 14