IDS IDS-iSYS, Руководство пользователя

Страница: 73 / 263

!
Calibrations for several lots of the same Biochemistry reagent can be programmed
simultaneously.
!
The current calibration can be displayed for a reagent lot by double-clicking on the lot number
or on the display area (light green area).
3-5-2- Programming Quality Controls
Controls can be performed at any time for the on-board reagent lots provided there is a valid calibration.
An automatic frequency can also be defined for each control in the assay setup.
Control levels validating the calibration and defined in the assay setup with an automatic frequency (once or
twice per day) are run in the number of replicates required by the frequency (singlicate or duplicate) at the first
programming of the day. When 2 runs per day are required, the same rule is applied for the first control run of
the afternoon. In the case of an automatic request, controls are run in the number of replicates defined in the
assay setup.
Accepting an automatic action
Automatic requests for controls are generated for each level, and only for reagent lots on board.
An automatic request must be confirmed in order to be performed.
The appearance of automatic actions are indicated with the icon flashing in the WARNING button.
•
From the main screen, click on the WARNING button.
All the automatic requests for controls generated by the system are shown in the lower part of the window,
under the label «Automatic Action». The reagent lot is displayed with the request.
•
A control request is accepted by clicking on .
Comment: a request for control generated automatically can be cancelled by clicking on . In this case, a
record is made in the event log.
!
Controls programmed by accepting automatic actions are always run in the number of
replicates defined in the assay setup.
Use
3-5- Programming Calibrations and Controls (continued)
IDS-iSYS User Manual - Revision M1
Use 3-5
58
Software version V 14