IDS IDS-iSYS, Руководство пользователя

Страница: 61 / 263

3-3- Installation of Ancillary Reagents
The ancillary reagents comprise:
•
IDS-iSYS Cuvettes.
•
Internal ancillary reagents.
•
External ancillary reagents.
Ancillary reagents are managed by the analyser:
•
for available on-board quantities,
•
for expiry date,
and, except for cuvettes:
•
for in-use stability.
The expiry date is managed for each lot.
When identifying a new ancillary reagent is identified, the system records the date and time of installation.
All operations of loading / unloading are recorded. Cumulative on-board time is calculated from this data
(displayed in the format Number of: Days \ Hours : Minutes : Seconds).
The expiry date of each individual ancillary reagent is established from the first on board installation date and
from its in-use stability, except for cuvettes. The on board expiry date of each cuvette cube is the lot expiry
date. The expiry time is set at 23:59 for all ancillary reagents.
A message displayed in the WARNING window the last day of use for a consumable indicates that expiry will
occur later that day.
Detailed information can be displayed by clicking on the icon of each consumable and is recorded in the menu
MANAGEMENT OF LOTS / ANCILLARIES
.
•
Click on to display the level of ancillary reagents available.
For each solution the current volume is displayed.
The number of IDS-iSYS Cuvettes present in the loader is displayed.
•
If an ancillary reagent is displayed as missing, either volume is inadequate or expiry date is exceeded (colour
code red), install a new ancillary reagent.
! If the analyser is carrying out an assay, only the IDS-iSYS Cuvettes cube and the IDS-iSYS
System Liquid can be replaced. The other ancillary reagents cannot be replaced until the
analyser has completed the cycle.
!
Only use IDS products.
Use
3-3- Installation of Ancillary Reagents
IDS-iSYS User Manual - Revision M1
Use 3-3
46
Software version V 14