Ideal Heating Logic Air DHW IDEPLUHP180DUOPPSZ, Установка и обслуживание

Страница: 10 / 94

Section 2 - Product Information
PRODUCT
INFO
10 Installation and Servicing
2.3 DHW CYLINDERS
Table 2 Data - Single Zone Pre-plumbed Cylinders
Figure 4. Plan View - PP Single Zone - 475 mm Figure 5. Plan View - PP Single Zone - 550 mm
Heat Up Time, HWA Heat Pump Test 002:2020 (flow rate 0.42l/s and flow temperature of 55°C)
Heat Up Time, BS EN 12897, G3 Performance Test (flow rate of 0.25l/s / 80°C).
The relative heat up times stated are based on the tests referenced above and carried out on all cylinders within the range. The stated test value may not reflect real life
performance within a residential environment.
1
2
3
4
5
6
7
8 Overh
eat T
herm
ostat
Con
trol T
herm
istor
CYLINDER
HOT OUTLET
ALLOW EXTRA 200MM
< - - - CLEARANCE FOR FILTER
& SPANNER ACCESS
CONTROL PANEL
MINIMUM
< - - CLEARANCE - - >
FOR REMOVAL
OF PTRV
<- MINIMUM WIDTH = 645 mm ->
<
- M
IN
IM
UM
D
EP
TH
=
6
25
m
m
->
236390 A01
All pipe holes are optional.
All pipe hole sizes are dictated by the
property / design. Therefore are a general indication.
The template is a general guide for installation
rather than a rule that must be followed without
deviation.
Number Description Size (mm)
1
Heat Pump Flow
28
2
Heat Pump Return
28
3 Central Heating Return 28
4
Central Heating Flow
22
5 Tundish Outlet 22
6 Balanced Cold Feed 22/28
7
Mains Cold Supply 22/28
8 Hot Water Feed 22/28
1
2
3
4
5
6
7
8
Overh
eat T
herm
ostat
Con
trol T
herm
istor
CYLINDER
HOT OUTLET
CONTROL PANEL
MINIMUM
< - - CLEARANCE - - >
FOR REMOVAL
OF PTRV
ALLOW EXTRA 200MM
< - - - CLEARANCE FOR FILTER
& SPANNER ACCESS
<
- M
IN
IM
UM
D
EP
TH
=
7
00
m
m
->
<- MINIMUM WIDTH = 700 mm ->
236390 A01
All pipe holes are optional.
All pipe hole sizes are dictated by the
property / design. Therefore are a general indication.
The template is a general guide for installation
rather than a rule that must be followed without
deviation.
Number Description Size (mm)
1 Heat Pump Flow 28
2
Heat Pump Return
28
3
Central Heating Return
28
4 Central Heating Flow 22
5 Tundish Outlet 22
6 Balanced Cold Feed 22/28
7 Mains Cold Supply 22/28
8 Hot Water Feed 22/28
Logic Air Single zone Pre-plumbed cylinders
General Description
150, 180; litre; 475mm & 550mm diameter; single coil cylinders intended for coupling with a range of heat pumps
5kW to 14kW; Pre-plumbed and pre-wired including control box. Intended for a single zone heating system
installation.
Assembly Model code/number
Logic Air DHW pre-
plumbed slimline cylinder
150L & control box 1-zone
Logic Air DHW pre-plumbed
slimline cylinder 180L &
control box 1-zone
Logic Air DHW pre-
plumbed cylinder 150L &
control box 1-zone
Logic Air DHW pre-plumbed
cylinder 180L & control box
1-zone
Assembly UIN 236203 236204 236198 236199
Cylinder model code/number IDEPLUHP150PPSZSL IDEPLUHP180PPSZSL IDEPLUHP150PPSZ IDEPLUHP180PPSZ
Energy Efficiency Class B C B B
Heat Loss
Watts 50 58 44 49
kWh/24h 1.21 1.40 1.07 1.18
Capacity (DHW content) Litres 145 169 148 170
Volume heated by immersion heater Litres 134 165 127 157
Weight Empty kg 46 53 44 48
Weight Full kg 192 222 192 219
Pressure Reducing valve setting bar 3 3 3 3
Expansion relief valve setting bar 4.5 4.5 4.5 4.5
Temperature setting of TPRV °C 95 95 95 95
Pressure setting of TPRV bar 6 6 6 6
Potable Expansion Vessel size. Litres 18 18 18 18
Expansion Vessel charge bar 3 3 3 3
Overall Width mm 581 581 636 636
Overall Height mm 1598 1870 1196 1384
Overall Depth mm 606 606 683 683
Cylinder Diameter mm A 475 A 475 A 550 A 550
DHW outlet mm B 1579 B 1851 B 1177 B 1365
Cylinder Height mm C 1519 C 1791 C 1118 C 1306
TPRV port mm D 1292 D 1564 D 875 D 1063
Manual reset overheat thermostat pocket mm E 1051 E 1151 E 673 E 673
Primary flow mm F 544 F 544 F 544 F 544
Secondary return port mm G - G - G - G -
Thermistor pocket mm H 668 H 759 H 532 H 584
Primary return mm J 95 J 95 J 95 J 95
Immersion heater pocket mm K 230 K 230 K 230 K 230
Cold water inlet mm L 1516 L 1788 L 1099 L 1287
Cylinder Drain mm M 220 M 220 M 220 M 220
CH1 Flow mm N 479 N 479 N 479 N 479
CH2 Flow (n/a to SZ version) mm P - P - P - P -
CH Return mm Q 95 Q 95 Q 95 Q 95
Buffer Connections mm R - R - R - R -
Buffer Inspection mm S - S - S - S -
Buffer Drain mm T - T - T - T -
Primary heat exchanger surface area m
2
1.8 3.0 1.6 2.5
Primary heat exchanger capacity Litres 6.4 10.6 5.6 8.5
HWA Heat pump Test - - - - -
Primary heat exchanger thermal rating kW 15.2 20.7 13.1 17.8
Heat up time from 10°C to 50°C min 22.3 21.8 22.6 22.6
V40 Litres 158.9 205.0 139.8 186.0
BS EN 12897 Test - - - - -
Primary heat exchanger thermal rating kW 33.2 39.3 25.7 32.8
Primary heat exchanger pressure loss bar 0.08 0.05 0.06 0.10
Heat up time from 10°C to 60°C min 13.9 15.8 16.4 17.6
V40 Litres 215.7 291.0 198.2 270.0
Revision Level D8.2 D8.2 D8.2 D8.2
applies to 236203 Logic Air DHW pre-plumbed slimline cylinder 150L & control
box 1-zone and 236204 Logic Air DHW pre-plumbed slimline cylinder 180L &
control box 1-zone
applies to 236198 Logic Air DHW pre-plumbed cylinder 150L & control box
1-zone and 236199 Logic Air DHW pre-plumbed cylinder 180L & control box
1-zone