hyfire HFW-W2W-01, Руководство по настройке системы

Страница: 128 / 302

www.acornfiresecurity.com
SECTION 5 (cont)
Un-checking the "LED Indication" boxes - "Fire" and "Battery discharge" - will stop the device
LED indicating if there is a fire activation or when the batteries reach a discharge state. The
default for these indications is to remain checked and it is recommended that these two
indications are left in the default state.
The "Supervisory Signal period" should be left at the default value of 1 minute. If the
device quantity is > 1, only the first device address will appear in the parameter window but all
devices of the type selected will have the same operational parameters.
The "Supervision period" would normally be left unchanged. This can be changed from the
default "3 mins" by changing the level in the "Supervision period" window.
On completion of parameter/process changing press .
The window will close and the user will be directed back to the "Configuration" tab for adding
further devices (if required).
WCTM Issue 3 Page 67 of 155