hyfire HFW-W2W-01, Руководство по настройке системы

Страница: 261 / 302

www.acornfiresecurity.com
SECTION 7 (cont)
The procedure for cloning Expander Modules is relatively straight forward. The engineer should follow
the directions in the window to complete the process.
When the window above is displayed, the engineer should follow the directions on the screen to
complete the cloning process.
To start the process, select the option. This will " un-grey " the option. Select
and a new screen will appear:
The engineer should select the correct COM Port that will allow the computer to communicate with the
Expander Module. The
"By default" option in the "Access password" window should be checked (the
default password is 1111).
At this point connect the computer to the suspect Expander Module using a standard RS232 cable.
When the COM Port has been selected,
is now available. Select this option to proceed.
WCTM Issue 3 Page 134 of 155