hyfire HFW-W2W-01, Руководство по настройке системы

Страница: 92 / 302

www.acornfiresecurity.com
SECTION 5 (cont)
INTRODUCTION
This section explains the facilities available when using the Wirelex Configuration Tool:
•
The Wirelex Configuration Tool has been designed to allow an Installation/Commissioning Engineer to program hybrid
wire to wireless radio detection/initiation and alarm devices prior to programming a Fire Control Panel.
•
If a wireless system has HFW-EM-01 Expander Modules associated with it, these can ONLY be programmed using the
Wirelex Configuration Tool.
•
If the parameters of field devices need to be amended away from the default settings, this can ONLY be carried out
using the Wirelex Configuration Tool.
•
There are additional applications built in to the Configuration Tool that allow the Engineer to:
Analyse the background RF environment
Change out faulty Translator/Expander Modules without having to reprogram the associated field
devices - as long as the program contained within the modules can still be read.
•
The Configuration Tool allows a Fire Alarm Engineer to interrogate an existing system to diagnose reported faults.
•
The Translator Module contains an "Events Log" that can be downloaded using the Wirelex Configuration Tool. This
can then be forwarded to a Technical Assistance Centre (if requested) to further analyse the fault and provide the
engineer with a corrective solution.
•
The "RF History" of a device can be downloaded using the Wirelex Configuration Tool for off-site analysis (if required)
WCTM Issue 3 Page 49 of 155