hyfire HFW-W2W-01, Руководство по настройке системы

Страница: 206 / 302

www.acornfiresecurity.com
SECTION 5 (cont)
LINK QUALITY HISTORY GRAPH
By highlighting a single device, moving the cursor over it and right clicking, two options are
displayed:
Show History: Selecting this option will display the RF link quality graph (shown below)
Clean History: This will clean all RF link quality information - resetting the graph.
(Shortcut - By double-clicking the device the RF link quality history graph will be displayed)
The different colours indicate the Mark
Quality:
GREEN - 5
YELLOW - 4
ORANGE - 3
PINK -2
The Orange dot indicates that the
Secondary Modem signal was stronger
than the Primary Modem signal for this
particular reading - this does not indicate
that there is a problem with the device
only that during that particular time frame
the signal seen at the Secondary Modem
was stronger - this is caused by vagaries
in radio propagation
The GREEN waveform indicates the RF link quality history for each device. The graph will
provide the user with as many as 8192 segments. This is the equivalent of a sample every 5
seconds over a 12 hour period.
WCTM Issue 3 Page 106 of 155