hyfire HFW-W2W-01, Руководство по настройке системы

Страница: 247 / 302

www.acornfiresecurity.com
SECTION 6 (cont)
From the last image, the system can be seen as a combination of the DAISY CHAIN system
and the SAME LAYER system.
Programming of the system should be as follows:
Program Translator Module
Program Translator Module devices
(Transfer lead to Expander Module)
Program Expander Module "EXP 1"
(Transfer lead to Expander Module 2)
Program Expander Module "EXP 2"
Program Expander Module "EXP 2" child devices
(Transfer lead to Expander Module 3)
Program Expander Module "EXP 3"
Program Expander Module "EXP 3" child devices
Program Expander Module "EXP 3"
(Transfer lead to Expander Module 2)
Program Expander Module "EXP 2"
(Transfer lead to Expander Module 1)
Program Expander Module "EXP 1"
(Transfer lead to Translator Module)
Program Translator Module
On completion carry out a LOAD command (see P.90)at the Translator Module. As before, it
will now be possible to control the whole system with the computer connected to the Translator
Module
The three processes detailed above should be used in isolation, or in combination, when
adding numerous Expander Modules to a system. The process is logical and must be followed
to avoid "losing" part of the system and prolonging the programming process.
WCTM Issue 3 Page 127 of 155