hyfire HFW-W2W-01, Руководство по настройке системы

Страница: 259 / 302

www.acornfiresecurity.com
SECTION 7 (cont)
CLONEX UTILITY
Open the Wirelex Configuration Tool. At this stage, the computer does not need to be connected to
the suspect Module. A standard RS232 programming cable should be at hand.
Although the Clonex utility transfers the system configuration, the Loop Address of the translator
Module and associated devices is NOT transferred. The Start Address should be recorded and this
can then be transferred in to the new Translator Module.
To read the Loop Start Address access the LOOP menu, press P2, SA will appear, press P2, the Loop
Address will now appear. Record and press P1 until the LCD is blank. On completion, the cloning
process can now proceed.
To access this facility, select the "Tools" option and at the drop down window select "ClonEx Utility"
This will open the ClonEx utility:
WCTM Issue 3 Page 133 of 155