hyfire HFW-W2W-01, Руководство по настройке системы

Страница: 241 / 302

www.acornfiresecurity.com
SECTION 6 (cont)
The following steps should be taken to ensure that all components of the system are
programmed correctly:
Program Translator Module
Program Translator Module devices
(Transfer lead to Expander Module 1)
Program Expander Module "EXP 1"
Program Expander Module "EXP 1" child devices
(Transfer lead to Expander Module 2)
Program Expander Module "EXP 2"
Program Expander Module "EXP 2" child devices
(Transfer lead to Expander Module)
Program Expander Module "EXP 1"
(Transfer lead to Translator Module)
Program Translator Module
If the above is followed correctly, the following window should be displayed:
On completion of this programming sequence a LOAD command (see P.90) should be carried
out at the Translator Module. The whole system can now be displayed and controlled with the
computer connected to the Translator Module as previously indicated.
WCTM Issue 3 Page 124 of 155