hyfire HFW-W2W-01, Руководство по настройке системы

Страница: 257 / 302

www.acornfiresecurity.com
SECTION 7 (cont)
Interpreting the information displayed is relatively straightforward:
The different coloured peaks seen above indicate packet data information being sent from devices
working on that frequency. At this point, the engineer can start to de-select channels, by un-checking
channels in turn at the "868MHz" window. This will help the engineer to select the best channel, in
his opinion, for the system to start from. As channels are deselected, colour scans will disappear
leaving only live/selected channels. With judicious selection, the engineer can select a channel with
minimum activity:
This channel can then be entered in to the "System" parameter options in the main Wirelex
Configuration Tool.
On completion of the analysis, close the window and disconnect the computer from the Translator
Module.
WCTM Issue 3 Page 132 of 155