hyfire HFW-W2W-01, Руководство по настройке системы

Страница: 116 / 302

www.acornfiresecurity.com
SECTION 5 (cont)
A window will appear allowing the engineer to amend the device operating parameters.
The default mode of operation for the Multi-Criteria Detector is "Fixed Rate-of-Rise" . This can
be changed to "Fixed" or "Rate-of Rise" by changing the "Thermo channel Type". The Multi-
Criteria Detector can also be changed in to a pure Optical Detector or Thermal Detector by
un-checking the associated "Process" button. The sensitivity of the smoke channel can be
amended from its default of "Normal" to "High" or "Low" .
Un-checking the "LED Indication" boxes - "Fire" and "Battery discharge" - will stop the device
LED indicating if there is a fire activation or when the batteries reach a discharge state. The
default for these indications is to remain checked and it is recommended that these two
indications are left in the default state.
The "Supervisory Signal period" should be left at the default value of 1 minute. If the device
quantity is > 1, only the first device address will appear in the parameter window but all devices
of the type selected will have the same operational parameters.
The "Supervision period" would normally be left unchanged. This can be changed from the
default "3 mins" by changing the level in the "Supervision period" window.
On completion of parameter/process changing press .
The window will close and the user will be directed back to the "Configuration" tab for adding
further devices (if required).
WCTM Issue 3 Page 61 of 155