hyfire HFW-W2W-01, Руководство по настройке системы

Страница: 291 / 302

www.acornfiresecurity.com
SECTION 8 (cont)
2. The second method takes slightly longer to complete, but if the Expander Modules are in
hard-to-access positions, the Expander Module properties can be read remotely from the
Translator Module.
Read the Translator Module properties as in method 1. Leave the RS232 lead connected to
the Translator Module on completion.
Ensure the "Configuration" tab is selected. Right-click the required Expander Module in the
"Radiosystem topology" area. A sub-window will appear. Select "Read Expander
Properties" as in Method 1. However, this time a further sub-window will appear:
This indicates that the Expander Module properties can be read remotely but that the radio link
must be established and of sound integrity and that the Expander Module must have power
applied. Select
.
A small sub-window will appear indicating the progress of the remote
reading:
WCTM Issue 3 Page 149 of 155