hyfire HFW-W2W-01, Руководство по настройке системы

Страница: 237 / 302

www.acornfiresecurity.com
SECTION 6 (cont)
DAISY CHAIN
When adding Expander Modules in a daisy chain format, the following process should be
followed. Deviation from this may result in incorrect reporting of faults and fires from trigger
devices and no activation of alarm devices.
Open the Wirelex software and whilst connected to the Translator Module via the RS232 port,
add a Translator Module (plus child devices) and first Expander Module (plus child devices) as
detailed in pages 110-116. DO NOT CARRY OUT ANY PROGRAMMING . The Wirelex
"Configuration" tab should appear as follows:
To add an additional Expander Module in a "daisy chain format", right click on "EXP 1"
selecting "Add expander" from the drop down menu:
This will open up the Expander Module properties window (see page 114). Ensure the system
parameters are correct. Press
on completion.
WCTM Issue 3 Page 122 of 155