hyfire HFW-W2W-01, Руководство по настройке системы

Страница: 170 / 302

www.acornfiresecurity.com
SECTION 5 (cont)
Ensure the Secondary Battery (CR2032) is fitted first, while the switch is in the 1 position.
Move the programming switch on the back of the device to the ON position. Insert the Primary
Battery (CR123A) into the device. When the primary battery is installed, the child device LED
will flash RED four times indicating the device is in programming mode. When the four RED
flashes have been seen, move the programming switch back to the 1 position. The device
LED will now flash GREEN twice to indicate initial programming is complete. The device may
continue flashing RED followed by two GREEN flashes prior to extinguishing. This is normal
and should not be a cause for concern.
On the Wirelex Configuration Tool, a sub-window will appear indicating programming is
complete:
Press
The child device icon will now become bold and the content of the "Prog." Column will change
from showing "-(radio)!" to a "+" indication:
WCTM Issue 3 Page 88 of 155