hyfire HFW-W2W-01, Руководство по настройке системы

Страница: 140 / 302

www.acornfiresecurity.com
SECTION 5 (cont)
Un-checking the "LED Indication" box - "Battery discharge" - will stop the device
LED indicating if the batteries reach a discharge state. The default for this indication is to
remain checked and it is recommended that this indication be left in the default state.
The wireless Sounder/Sounder Beacon has a tamper spring mounted on the device. If the
device is removed from its base, an indication is sent to the associated Translator Module and
ultimately to the Fire Control Panel. If there is a requirement to NOT monitor this process, the
check box "Do not supervise tamper detector", should be checked. The default for this
process is for the check box to be un-checked.
The "Supervisory Signal period" should be left at the default value of 7 seconds. If the
device quantity is > 1, only the first device address will appear in the parameter window but all
devices of the type selected will have the same operational parameters.
The "Supervision period" would normally be left unchanged. This can be changed from the
default "3 mins" by changing the level in the "Supervision period" window.
On completion of parameter/process changing press .
The window will close and the user will be directed back to the "Configuration" tab for adding
further devices (if required).
WCTM Issue 3 Page 73 of 155