hyfire HFW-W2W-01, Руководство по настройке системы

Страница: 271 / 302

www.acornfiresecurity.com
SECTION 7 (cont)
The following page will be revealed. If the Voice Sounder is not connected to the computer, a drawing
of a RS232 lead will be displayed and a warning will be shown. Select the correct COM port for
communication between the computer and the device.
Connect the Voice Sounder to the computer using a RS232 lead and the displayed picture will change
from a lead to a representation of Voice Sounder (see below).
To start the programming process, the location of the sound files to be imported must be identified.
Select the correct location by clicking on the icon highlighted (below left). The sound files will need to
be located from the computer hard drive (example below right)
The sound files should now be detailed in the window on the left of the screen.
(The image above is an example and may be appear differently on other computers)
WCTM Issue 3 Page 139 of 155