hyfire HFW-W2W-01, Руководство по настройке системы

Страница: 83 / 302

www.acornfiresecurity.com
SECTION 4 (CONT)
EXPANDER MODULE PCB AND CONNECTIONS
X1 Provides the following connections:
+SL ] Linking to external devices
-SL ]
NOT USED IN THIS CONFIGURATION
X2 Provides the following connections:
RD ] Used when hard wiring a RS232
TD ] connection to the Expander
CTS ] Module
GND ]
X3
X4
NOT USED IN THIS CONFIGURATION
RS232 Connector (F) - used when
connecting a laptop computer to the
Expander Module
Provides the following connections:
+5V
]
-5V ]
+KPD ] For linking to external Auxiliary Devices
-KPD ] e.g. Wireless Keypad, Control Equipment BVI1
]GND ]BVI2 ]
X5
X7
NOT USED IN THIS CONFIGURATION
Two Open Collector contacts that provide a 200mA output for connecting to a Sounder (SND) or
Beacon (LMP)
NOT USED IN THIS CONFIGURATION
Provides the following connections:
+DC ] For monitoring the power supply
+AC ] For monitoring the power supply
+12 ] Power Supply Connection (+)
-12 ] Power Supply Connection (-)
-----------------------------------------------
X7 R1/R1/R ]
R2/R2/R ] Three Normally Open (NO)/ Normally Closed (NC) relays
R3C/R/R3O ]
NOT USED IN THIS CONFIGURATION
PROGRAMMING
The Expander Module can ONLY be programmed using the software supplied with the Translator
Module (HFW-W2W-01).
The Expander Module and associated devices should be programmed in accordance with Section 6.
To use the software tool, connect a laptop computer to the RS232 connector (X3) on the Expander
Module front PCB - a standard RS232 cable is to be used.
WCTM Issue 3 Page 44 of 155
www.acornfiresecurity.com