hyfire HFW-W2W-01, Руководство по настройке системы

Страница: 196 / 302

www.acornfiresecurity.com
SECTION 5 (cont)
III. SUBSTITUTION ATTEMPT
The comment shown in the box titled "Status of devices" indicates that a device has been
introduced to the system that has the same address - comparable with a hard-wired "Double
Address Fault".
This will happen if an apparently
faulty device is removed from the
system and replaced with a new
device. However, if the batteries
from the old device are still in
place, the removed device
retains in its memory the digital
address originally prescribed to it
by the Translator Module and will
try to regain communication with
the Translator Module.
Removing the batteries from the
faulty device and re-initialising
the new device will eliminate this
fault.
IV. NO RADIO LINK/NO LINK
This fault occurs if:
a. A device is out of range
of its associated Translator
Module or Expander Module.
By moving the device back in to
range and performing a RESET
command, this fault will
disappear.
b. If the batteries within the
device have both discharged
and the previous warnings about
battery discharge have been
ignored. By replacing both cells
in the device, and performing a
RESET command, this fault will
disappear
WCTM Issue 3 Page 101 of 155