hyfire HFW-W2W-01, Руководство по настройке системы

Страница: 295 / 302

www.acornfiresecurity.com
SECTION 8 (cont)
If there are Expander Modules connected to the Translator Module, select the "Link Quality" tab,
right click on "TXLTR" , select the "Sending signal levels between all expanders" option followed
by the "Turn on" option. This will ensure parameters of field devices associated with Expander
Modules can be viewed correctly to assist in fault diagnosis.
(Note: The "Link" time of devices on the Expander Modules does not increment when read from
remote. This can only be achieved with the computer directly linked to the Expander Module.
On completion of all changes/interrogation, disconnect the PC from the Translator Module ensuring
the Translator Module/Expander Module front covers are secured correctly and that all faults, if not
cleared, are recorded for further analysis.
WCTM Issue 3 Page 151 of 155