background image

ENglISH VErSIoN

2

LW310V2 Sweex Wireless 300N Router

 
Please notice! On the included CD-ROM you will find the Setup Wizard. This easy install procedure will show you how 
to setup the router step-by-step.

•   Do not expose the Sweex Wireless 300N Router to extreme temperatures. Do not place the device in direct sunlight or in the direct vicinity of 

heating elements.

•   Do not use the Sweex Wireless 300N Router in extremely moist or dusty surroundings.
•   Protect the device against powerful shocks and falls – they may damage the internal electronics.
•   Never attempt to open the device yourself, there are no serviceable parts inside. Opening the device will cause the warranty to lapse.

Package contents

 
In this package you will find:

•   Wireless 300N router
•   Power adapter
•   Network cable
•   CD-ROM with driver, software and this manual 
If you find that any of the package contents are missing, please return the package to the sales point where it was bought.

Terminology list

 
This manual will contain a number of technical terms. It is important to know what they mean before you begin 
installing and configuring the router.

•   Router: This is the product you have just bought. A router acts as a boundary between two networks, WAN and LAN.
•   Network cable. A network cable is used for connecting network devices such as computers, modems and routers. You may already have such a 

cable, the cable in the package contents is intended to connect the router to your modem.

•   ISP: Internet Service Provider, this is the company that supplies you your Internet connection.
•   Broadband modem: From here on: modem. Your modem is the device you already have or that has been supplied to you by your ISP that 

currently provides your internet connection. The two most common modem types are cable modems and ADSL modems, but other kinds of 
modems also exist.

•   LAN: LAN stands for “Local Area Network”, in the case of this router, the LAN consists of the four yellow ports and the wireless network. With the 

router, all your computers will form a single LAN.

•   WAN: WAN stands for “Wide Area Network”, in most cases this means the Internet.
•   Wireless security: By default, the router’s wireless network is not secured. This means that anyone in range (including your neighbours) can 

connect to the network and use your internet connection. Wireless security protects your network so that only authorised devices can gain access. 
Sweex recommends all users to secure their wireless network after installation using either the WPA or WPS methods explained further on in the 
“securing your wireless network” chapter of this manual.

LW310V2_Manual_01.indd   2

03-11-09   13:32

Содержание LW310V2

































Отзывы: