Husqvarna FE 350 2014, Руководство по ремонту, Страница: 74 / 279

10 EXHAUST
-0
M00435-10
Main work
(FE 350 EU/ AU)
- Remove all screws on the main silencer.
- Take off silencer cap
O
and 0-ring @.
- Take off outer tube (D and 0-ring
C,.
- Remove glass fiber yarn filling
0
from inner tube (D.
- Clean the parts that need to be reinstalled and check for damage.
- Mount the new glass fiber yarn filling on the inner tube.
- Mount 0-ring
C,
onto connecting cap
@.
- Position the inner tube with the connecting cap and glass fiber yarn filling in
the outer tube.
- Mount 0-ring
8
on the silencer cap.
- Position the silencer cap with 0-ring
8
in the outer tube.
- Mount and tighten all of the screws.
Guideline
I
Screws on the main silencer
(FE 350 US)
- Remove screws
O
of connecting cap
8.
I 7 Nm (5.2 lbf ft)
- Remove the connecting cap with the perforated pipe, 0-ring (D, and glass
fiber yarn filling
C,.
- Remove screws
0
and silencer cap (D with 0-ring @.
- Remove screws @)
and insert
@)
together with insulating pad
G,!).
- Remove the insulating pad from the insert.
- Clean the parts that need to be reinstalled and check for damage.
- Mount the new insulating pad on the insert and fasten with adhesive tape.
- Position the insert with the insulating pad in outer tube
41.
Mount and tighten screws
@).
Guideline
I
Screws on the main silencer
I
MS
- Mount 0-ring (D on the silencer cap.
- Mount new glass fiber yarn filling on the perforated pipe.
I 7 Nm (5.2 lbf ft)
Mount the connecting cap with the glass fiber yarn filling in the outer tube.
• Info
I
Press the glass fiber yarn filling into the outer tube using a blunt tool.
- Mount and tighten screws
Q.
Guideline
I
Screws on the main silencer
I
MS
- Mount 0-ring @ on the silencer cap.
- Position the silencer cap with 0-ring @ in the outer tube.
- Mount and tighten screws@).
Guideline
I
Screws on the main silencer
Finishing work
- Install the main silencer. (or p. 71)
- Install the right side cover. (or p. 76)
I 7 Nm (5.2 lbf ft)
I 7 Nm (5.2 lbf ft)
72