Power Line Carrier ____________________________________________________________________
RF-MCGARDPRO
Hubbell Power Systems, Inc.
–
RFL™
Products
July 1, 2022
©2022 Hubbell Incorporated
5-20
5.4.2 On/Off Mode - Status, Configuration and Test
Clicking on the PLC On/Off module in the dashboard will display its status as shown below. You
can also navigate to the status page from the main navigation menu at the left of the web page.
On/Off Status
Menu location: Status > PLC
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
18
19
20 21 22
17
Figure 5-10. On/Off Status
Transmitter:
1.
Transmitter State:
Indicates the transmitter state as follows:
“Block TX” or “Carrier Off.”
2.
TX Power Level:
Indicates the TX power output level of the PLC system in dBm
referenced to 50 Ωs or indicates “No TX Signal.”
3.
TX Level Alarm:
Indicates whether the transmitter is in alarm state as follows:
“TX Fail” or “No Alarm.”
4.
Reflected Power:
Records the reflected power as a percent or indicates “No TX Signal.”
5.
Reflected Power Level:
Reports the reflected power level as follows:
“Excess Reflected Power” or “No Alarm.”
