4.
Open both latches
(1)
of the memory module socket , and remove the memory module from the
socket
(2)
.
Figure 7-4
Removing a DIMM
To install a memory module, reverse the removal procedures.
NOTE:
A memory module can be installed in only one way. Match the notch on the module with the
tab on the memory socket.
A DIMM must occupy the XMM1 socket.
To create a dual-channel memory configuration, the memory capacity of Channel A must equal the
memory capacity of Channel B. Refer to
Populating DIMM Sockets on page 46
for more information.
48
Chapter 7 Removal and Replacement Procedures – Microtower Chassis
Содержание A7L26UT#ABA
Страница 4: ...iv About This Book ...
Страница 10: ...x ...
