manualshive.com logo in svg

HP A7L26UT#ABA, Руководство по техническому обслуживанию и ремонту

"HP A7L26UT#ABA" - это надежный и производительный ноутбук, идеально подходящий для работы и развлечений. На нашем сайте вы можете бесплатно скачать брошюру и руководство пользователя для этого устройства. Посетите {веб-сайт} и получите всю необходимую информацию для комфортного использования ноутбука.

Поделиться
Скачать
background image

Table 3-4

  Computer Setup—Security (continued)

System IDs

Allows you to view:

●

Product Name

●

Serial number

●

Universal Unique Identifier (UUID) number. The UUID can only be updated if the current
chassis serial number is invalid. (These ID numbers are normally set in the factory and are
used to uniquely identify the system.)

●

SKU Number

●

Family Name

●

Asset tag (18-byte identifier), a property identification number assigned by the company to
the computer.

●

Feature Byte

●

Build ID

●

Keyboard locale setting for System ID entry

System Security

(some models: these
options are hardware
dependent)

Data Execution Prevention (enable/disable) - Helps prevent operating system security breaches.
Default is enabled.

Virtualization Technology (VTx/VTd)(some models) (enable/disable) - Controls the virtualization
features of the processor and DMA remapping features of the chipset. Changing this setting
requires turning the computer off and then back on. Default is disabled.

Intel TXT (LT) Support (some models) (enable/disable) - Controls the underlying processor and
chipset features needed to support a virtual appliance. Changing this setting requires turning the
computer off and then back on. Default is disabled. To enable this feature you must enable the
following features:

●

Embedded Security Device Support

●

Virtualization Technology

●

Virtualization Technology Directed I/O

Embedded Security Device Support (some models) (enable/disable) - Permits activation and
deactivation of the Embedded Security Device. Changing this setting requires turning the
computer off and then back on.

NOTE:

To configure the Embedded Security Device, a Setup password must be set.

●

Reset to Factory Settings (some models) (Do not reset/Reset) - Resetting to factory defaults
will erase all security keys. Changing this setting requires turning the computer off and then
back on. Default is Do not reset.

CAUTION:

The embedded security device is a critical component of many security

schemes. Erasing the security keys will prevent access to data protected by the Embedded
Security Device. Choosing Reset to Factory Settings may result in significant data loss.

OS management of Embedded Security Device (some models) (enable/disable) - This option
allows the user to limit operating system control of the Embedded Security Device. Changing this
setting requires turning the computer off and then back on. This option allows the user to limit OS
control of the Embedded Security Device. Default is enabled.

Reset of Embedded Security Device through OS (some models) (enable/disable) - This option
allows the user to limit the operating system ability to request a Reset to Factory Settings of the
Embedded Security Device. Changing this setting requires turning the computer off and then back
on. Default is disabled.

NOTE:

To enable this option, a Setup password must be set.

14

Chapter 3   Computer Setup (F10) Utility

Содержание A7L26UT#ABA









































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для A7L26UT#ABA

Acer Aspire T160 Guía Del Usuario preview
Aspire T160
Бренд: Acer Страницы: 24
Acer Aspire T135 Guía Del Usuario preview
Aspire T135
Бренд: Acer Страницы: 24
TechNexion TEK3-BSW Product Manual preview
TEK3-BSW
Бренд: TechNexion Страницы: 37
IBM PC 300 GL Type 6272 Installation Manual preview
PC 300 GL Type 6272
Бренд: IBM Страницы: 94
Fluidwell F127-P-EL-TA Operation Manual preview
F127-P-EL-TA
Бренд: Fluidwell Страницы: 52
qian.mx XIAO PC User Manual preview
XIAO PC
Бренд: qian.mx Страницы: 68
Vecow ECS-9740-505M-GTX1050 User Manual preview
ECS-9740-505M-GTX1050
Бренд: Vecow Страницы: 111
Zotac 4895173622649 Quick Start Manual preview
4895173622649
Бренд: Zotac Страницы: 57
Amiga A4000 User Manual preview
A4000
Бренд: Amiga Страницы: 113
Uplift Desk UDA116 Instructions preview
UDA116
Бренд: Uplift Desk Страницы: 2
NovaSail NS360 Operating Manual preview
NS360
Бренд: NovaSail Страницы: 32
Ergotron Dual User Manual preview
Dual
Бренд: Ergotron Страницы: 20
HONEYWELL BULL DPS6 PLUS Installation Manual preview
DPS6 PLUS
Бренд: HONEYWELL BULL Страницы: 73
TYAN Tank GT20 (B5211) Service Manual preview
Tank GT20 (B5211)
Бренд: TYAN Страницы: 73
Cybernet H6 i-One Series User Manual preview
H6 i-One Series
Бренд: Cybernet Страницы: 30
Cincoze GEB-3301-R10 User Manual preview
GEB-3301-R10
Бренд: Cincoze Страницы: 183
Vantron IBOX3588 Edge AI User Manual preview
IBOX3588 Edge AI
Бренд: Vantron Страницы: 53
Shuttle XPC slim DL10J Series User Manual preview
XPC slim DL10J Series
Бренд: Shuttle Страницы: 25

Бренды по названию

Популярные бренды

Загрузить еще бренды