HP 5/xx Скачать руководство пользователя страница 60

Страница: 60 / 77

HP Vectra XU PC – Setting Up

Troubleshooting and Error Messages

••

BIOS and Operating System Error Messages

Errors when starting the PC (boot error):

Boot program in first sector of
diskette is invalid, cannot
start from this diskette. Cannot
start from hard disk. (A new
drive may need to be partitioned
and formatted.)

Explanation

: There is a problem with the disk

drive, or the disk drive is not properly formatted.

Corrective Action(s)

: Insert a diskette with the

proper operating system, and press any
alphanumeric key to continue.

Insert system diskette in drive.
Press any key to continue.

Explanation

•

There is no diskette containing the operating

system in drive A.

•

The hard disk drive is disabled, or not present.

Corrective Action(s):

Insert a diskette with the

proper operating system, and press any
alphanumeric key to continue.

Missing operating system.

Explanation:

You tried to start the PC but the PC

could not find the operating system.

Corrective Action(s):

Run SETUP and make

sure the hard disk has been correctly configured.

Cannot start from hard disk

Explanation:

Your IDE hard disk drive is

incorrectly configured in SETUP.

Corrective Action(s):

Run SETUP and go to the

IDE Hard Disk Drives Interface section

•

Select

Standard

instead of

Enhanced

in the

Data Transfer Method

field.

•

Select

Standard CHS

insted of

Automatic

the Translation Method field

System boot process failed.
Press any key to try again.

Explanation:

You tried to start the PC but the PC

could not find the operating system.

Corrective Action(s):

•

Check the diskette contains the operating

system.

•

Check the hard disk contains the operating

system.

•

Ensure "start from flexible disk" or "start from

hard disk" is enabled in SETUP.

•

For a network, ensure "remote start" is enabled

in SETUP.

Errors when using the PC (operating system error):

Содержание 5/xx














































































Результаты поиска

Содержание 5/xx

Отзывы:

HP 5/xx, Руководство по введению, Страница: 60 / 77

Результаты поиска

Содержание 5/xx

Отзывы: