HP Vectra XU PC – Setting Up
Installing Accessories
••
36
1st hard disk drive
(SCSI or IDE)
For a SCSI hard disk drive, run SETUP and check the
SCSI
Integrated Interface
and
SCSI BIOS
fields
are enabled. (Refer to “Configuring Your PC”.) In
Windows, double-click on the relevant
Readme
icon in the
Hputils
group, in the
Program Manager
. Follow the
instructions on how to install the software drivers. For an
IDE drive, run SETUP and check the IDE
Integrated
Interface
is enabled and the drive is detected. (Refer to
“Configuring Your PC”.)
Format the drive and install an operating system. (Refer to
the manuals for your operating system.) Install any
applications, referring to their manuals.
2nd hard disk drive
(SCSI or IDE)
For a SCSI hard disk drive, run SETUP and check the
SCSI
Integrated Interface
and
SCSI BIOS
fields
are enabled. (Refer to “Configuring Your PC”.) In
Windows, double-click on the relevant
Readme
icon in the
Hputils
group, in the
Program Manager
. Follow the
instructions on how to install the software drivers.
For an IDE drive, run SETUP and check the IDE
Integrated Interface
is enabled and the drive is
detected. (Refer to “Configuring Your PC”.)
Format the drive, referring to the manuals for your
operating system.
Main memory
Run SETUP and check that memory is detected.
Matrox video memory
Configure the video resolution using the
HP User Tools
, in
the
HPutils
Group in Windows.
Follow the instructions on the screen.
ISA accessory board
Run SETUP, then run the
ISA Configuration Utility
in
the
Plug and Play
group, in Windows. Make sure the
board's information corresponds with the board you have
installed.
Upgrade processor
Run SETUP and check the upgrade processor is detected.
If the new accessory does not seem to work properly, refer to the manuals supplied with the accessory.
If the PC displays an error message, refer to “Troubleshooting and Error Messages” for details.
