HP Vectra XU PC – Setting Up
Installing Accessories
••
25
3. Remove the existing processor, placing it carefully to one side.
4. Position the replacement processor over the ZIF socket, from which you removed the
existing processor. Align the processor and socket corner markers correctly.
5. Place the replacement processor into the ZIF socket. If the processor is not seated
correctly, do NOT press it into the socket. Lift it out and try again.
6. Lower the ZIF socket lever to lock the processor into place.
7. Put the processor you took out of the PC in the packaging provided with the new
processor. Keep this in a safe place for possible future use.
8. Set the system board switches to the appropriate settings as described in the following
pages.
To install an OverDrive for Pentium processor:
1. Remove the PC's cover and power supply, as described under "Removing the Cover."
2. Unlock the empty ZIF socket by raising the locking lever.