manualshive.com logo in svg

HP 5/xx, Руководство по введению, Страница: 49 / 77

Поделиться
Скачать
HP 5/xx Скачать руководство пользователя страница 49

 HP Vectra XU PC – Setting Up

Configuring Your PC  

••

  49

If you have installed a Matrox video adapter board, SETUP cannot be used to configure it.
Refer to 

Configuring the Matrox Video Adapter Board

, later in this chapter.

Displaying the BIOS Version and PC Serial Number

SETUP shows the current BIOS Version and the PC Serial Number. If you intend to upgrade
the BIOS using the "HPROMInit" utility, the upgrade diskette must contain a later BIOS
version than the current version on the PC. (Refer to 

If the PC does not Work: Error

Messages

, in “Troubleshooting and Error Messages”.)

What to do Next

When you have made all your changes, you must save them and exit SETUP.

1. Press 

[

F3

]

 to save the changes.

2. Follow the instructions on the screen to exit SETUP.

Your PC automatically restarts. If you have set a User Password, the User Password prompt
is displayed. Type your User Password and press 

[

ENTER

]

.

NOTE

After making any changes in SETUP, run the 

ISA Configuration Utility

 in the

Plug and Play

 group, in Windows. This updates Plug and Play information on

system resources.

The PC is now ready to use.

•

To run application software on the PC, refer to the manuals supplied with your
application software.

•

If you have problems with the PC, refer to “Troubleshooting and Error Messages” for
details.

•

If your PC has a Matrox video adapter board, refer to the section 

Configuring the

Matrox Video Adapter Board

, later in this chapter.

Содержание 5/xx














































































Отзывы:

Нет отзывов