manualshive.com logo in svg

HP 5/xx, Руководство по введению, Страница: 42 / 77

Поделиться
Скачать
HP 5/xx Скачать руководство пользователя страница 42

 HP Vectra XU PC – Setting Up

Configuring Your PC  

••

  42

On a PC with one flexible disk drive, 

Drive 1

 (the top drive) will be set to 

3.5 inch, 1.44

MB

, and 

Drive 2

 set to 

None

.

If you have installed an optional flexible disk drive that uses the integrated disk interface,
ensure that SETUP has detected the drive. If you have installed an optional flexible disk
drive that has its own controller board, set the 

Interface

 field to 

Controller Board

.

Configure the controller board as described in its manual.

If you have two flexible disk drives, set one as the 

Bootable Drive

. This is the drive the

PC uses to start (boot) from a system diskette.

Configuring SCSI Hard Disk Drives

If you have installed an optional SCSI hard disk drive, configure it in SETUP.

To configure an IDE hard disk drive:

1. If your PC has no IDE hard disk drives, in the “IDE Hard Disk Drives Interface” section,

both the 

Drive 1

 and 

Drive 2

 fields will be set to 

None

 or 

SCSI

.

2. If your PC has one IDE hard disk drive already installed, check that the 

Drive 1

 field is

set to 

Configured

 and the 

Drive 2

 field is set to 

None

 or 

SCSI

.

3. In the 

Integrated SCSI Interface

 group, check the 

Integrated Interface

field is set to 

Enabled

.

4. Highlight the 

SCSI BIOS

 field, and check it is set to 

Enabled

.

Configuring IDE Hard Disk Drives

If you have installed an IDE hard disk drive, configure it in SETUP.

To configure an IDE hard disk drive:

1. A primary drive (Drive 1) uses the long IDE cable; a secondary drive (Drive 2) uses the

short IDE cable. Check the corresponding 

Drive 1

 or 

Drive 2

 field is set to

Configured

.

Содержание 5/xx














































































Отзывы:

Нет отзывов