HNC Electric HV590 Series, Руководство пользователя

Страница: 54 / 192

40
Section V. Parameter Function Table
Communication set value
U0.29 Encoder feedback speed 0.01Hz
PG feedback speed, accurate to 0.1hz
U0.30 Main frequency X display 0.01Hz
P0.03 main frequency source set frequency
U0.31 Auxiliary frequency Y display 0.01Hz
P0.04 auxiliary frequency source set frequency
U0.32 View arbitrary memory address value 1
To view arbitrary memory address, advanced commissioning function.
U0.33 Reserve 0.0°
U0.34 Motor temperature 1
℃
Display motor temperature. Other device temperature can also be tested through different temperature
measuring point.
U0.35 Target torque(%) 0.1%
Target torque setup.In torque control mode, it is used to check the set target torque.
U0.36 Rotary variable position 1
It’s rotor position when speed feedback.
U0.37 Power factor angle 0.1
Current power factor angle
，
power factor=COS(angle)
，
angle=0
，
maximum power.
U0.38 ABZ position 0.0
ABZ incremental feedback position information of encoder calculation.
U0.39 VF target voltage separation 1V
VF target voltage when power supply separating.
U0.40 VF output voltage separation 1V
VF output voltage when power supply separating.
U0.41 DI input status intuitive display -
Display DI input status intuitively, offer DI input information more detailed than U0.07, advanced