HNC Electric HV590 Series, Руководство пользователя

Страница: 133 / 192

119
Section V. Parameter Function Table
A1.17
VDO2 output delay time 0.0s~3600.0s
0.0s
☆
A1.18
VDO3 output delay time 0.0s~3600.0s
0.0s
☆
A1.19
VDO4 output delay time 0.0s~3600.0s
0.0s
☆
A1.20
VDO5 output delay time 0.0s~3600.0s
0.0s
☆
A1.21
VDO output terminal valid
state selection
1bit VDO1
00000
☆
Positive logic
0
Negative logic
1
10bit VDO2
Positive logic
0
Negative logic
1
100bit VDO3
Positive logic
0
Negative logic
1
1000
bit
VDO4
Positive logic
0
Negative logic
1
10000
bit
VDO5
Positive logic
0
Negative logic
1
Virtual digit output function , which is similar with control board DO output function , can be used to
cooperate with virtual digit input VDIx, to realize some simple logic control.
When virtual VDOx output function selecting 0, VDO1~VDO5 output states is determined by input
states of DI1~DI5 on the keyboard.VDOx and DIx one-to-one corresponding.
When virtual VDOx output function selecting non-zero digits, VDOx function setting and use
method are same with P5 group DO output relevant parameters, for details please refer to P5 group.
Similarly, VDOx output valid state can choose positive or negative logic, and set through A1.21.
For VDOx use reference , please refer to applications for VDIx use .
5.20 The second motor control
：
A2.00-A2.65
HV590 can switch operation between 4 motors. The 4 motors could set motor nameplate
parameters, tune motor parameters, use V/F control or vector control, set encoder relating
parameters and set V/F control or vector control relating parameters respectively.
Groups of A2
、
A3
、
A4 are corresponding to motor2
、
motor3
、
motor4 respectively. And
the layout of the 3 groups of function codes are completely consistent .
For details please refer to relating parameters of motor1.
Code
Description/
Setting Range Factory Change