HNC Electric HV590 Series, Руководство пользователя

Страница: 62 / 192

48
Section V. Parameter Function Table
Fig.5-1Acceleration/decelerationtime schematic diagram
HV590 totally offers 4 groups of speed-up/speed-DOWN time for selection,you can shift through
digital input terminal DI,4 groups of them are shown as follows
：
GROUP 1
：
P0.17
、
P0.18;
GROUP 2
：
P8.03
、
P8.04;
GROUP 3
：
P8.05
、
P8.06;
GROUP 4
：
P8.07
、
P8.08.
P0.19
Acc./dec. time unit
1second
0
1
★
0.1 seconds 1
0.01 seconds
2
HV590 offers 3 kinds of speed-up /speed down time unit to meet the need of all kinds of
scene.Respectively for 1 second
、
0.1 seconds and 0.01 seconds.
Caution
：
Decimal places as well as corresponding acceleration/deceleration time of the 4 groups may
be changed when modifying this function parameter,special attention should be paid in the process of
application.
P0.21
Auxiliary frequency source
offset frequency
0.00Hz~Maximum frequencyP0.10
0.00Hz
☆
It is valid only at the time of main/auxiliary operation is choosen.
When frequency source is main / auxiliary operation(P0.21 as offset frequency) ,it could make
frequency set more flexible by stacking offset frequency on main& auxiliary operation as the final frequency
set value.
P0.22
Frequency command
resolution
0.1Hz 1
2
★
0.01Hz 2
This parameter is used to dertermine all the function code resolution which is relevant to frequency.
Frequency resolution is 0.1Hz , HV590 maximum output frequency can reach 3200Hz. While
frequency resolution is 0.01Hz, HV590 maximum output frequency is 320.00Hz.
Caution
：
Parameter (relating to frequency ) decimal digits and corresponding frequency value will
change through modifying P0.22. Special attention should be paid during operation.
P0.23
Digital setup frequency
memory selection upon stop
Without memory
0
0
☆
Memory
1
This function is only valid when frequency source is digital setup.
0
：
Without memory
Actual deceleration time
Output frequency
Hz
t1 t2
Setting deceleration time
t
Acceleraion/deceleration
reference frequency
Setting frequency
Actual acceleration time
Setting acceleration time