HNC Electric HV590 Series, Руководство пользователя

Страница: 126 / 192

112
Section V. Parameter Function Table
PE.16 User function code 16 P0.00~PP.xx,A0.00~Ax.xx,U0.xx P0.00
☆
PE.17 User function code 17 P0.00~PP.xx,A0.00~Ax.xx,U0.xx P0.00
☆
PE.18 User function code 18 P0.00~PP.xx,A0.00~Ax.xx,U0.xx P0.00
☆
PE.19 User function code 19 P0.00~PP.xx,A0.00~Ax.xx,U0.xx P0.00
☆
PE.20
User function code 20 P0.00~PP.xx,A0.00~Ax.xx,U0.xx P0.00
☆
PE.21
User function code 21 P0.00~PP.xx,A0.00~Ax.xx,U0.xx P0.00
☆
PE.22
User function code 22 P0.00~PP.xx,A0.00~Ax.xx,U0.xx
P0.00
☆
PE.23
User function code 23 P0.00~PP.xx,A0.00~Ax.xx,U0.xx P0.00
☆
PE.24
User function code 24 P0.00~PP.xx,A0.00~Ax.xx,U0.xx P0.00
☆
PE.25
User function code 25 P0.00~PP.xx,A0.00~Ax.xx,U0.xx P0.00
☆
PE.26
User function code 26 P0.00~PP.xx,A0.00~Ax.xx,U0.xx P0.00
☆
PE.27
User function code 27 P0.00~PP.xx,A0.00~Ax.xx,U0.xx P0.00
☆
PE.28
User function code 28 P0.00~PP.xx,A0.00~Ax.xx,U0.xx P0.00
☆
PE.29
User function code 29 P0.00~PP.xx,A0.00~Ax.xx,U0.xx P0.00
☆
This function group is the user customization function code.
Users can put the required parameters (among all HV590 function codes) to the PE group as the user
customization function group.
PE group can offer 30 user customization function codes at most.When PE displays P0.00, it means
user function code is null.
In user customization function mode, display of the function codes is defined through PE.00~PE.31.
Sequence is consistent with the PE function codes, skip P0.00.
5.17 Function code management
：
PP.00-PP.04
Code
Description/
Keyboard Display
Setting Range
Factory
Setting
Change
Limit
PP.00
User password 0~65535
0
☆
The password set function is used to prohibit the unauthorized person from viewing and modifying
the parameters.
When the parameter is set to any non-zero number, the password protection function is enabled. If
no password is needed, change the parameter value to 00000.
After the user password is set and takes effect, when entering the password settin g state, if the
user password is incorrect, you cannot view and modify the parameter. You can only view the operation
display parameters and stop displaying parameters.
Please keep your password in mind. If you set the password mistakenly orforget the pass word,
please contact the manufacturer.
PP.01
Parameter initialization
No function
0
0
★
Restore to factory default value,motor
parameter not included
1