H3C S5810 Series, Руководство по эксплуатации

Страница: 270 / 820

1-6
This feature allows you to switch to different user levels without affecting the current FTP connection
(namely, the FTP control connection, data connection and connection status are not changed); if you
input an incorrect username or password, the current connection will be terminated, and you must
return to user view and log in with the ftp command again.
Follow the step below to use another username to log in to the FTP server:
To do… Use the command… Remarks
Use another username to relog in after
successfully logging in to the FTP server
user username [ password ] Optional
Maintaining and Debugging an FTP Connection
After a device serving as the FTP client has established a connection with the FTP server (For how to
establish an FTP connection, refer to Establishing an FTP Connection .), you can perform the following
operations to locate and diagnose problems encountered in an FTP connection:
To do… Use the command… Remarks
Display the help information of
FTP-related commands supported
by the remote FTP server
remotehelp [ protocol - command ] Optional
Enable information display in a
detailed manner
verbose
Optional
Enabled by default
Enable FTP related debugging when
the device acts as the FTP client
debugging
Optional
Disabled by default
Terminating an FTP Connection
After the device serving as the FTP client has established a connection with the FTP server (For how to
establish an FTP connection, refer to Establishing an FTP Connection .), you can use any of the
following commands to terminate an FTP connection:
To do… Use the command… Remarks
Terminate the connection to the FTP
server without exiting FTP client view
disconnect
Optional
Equal to the close
command.
Terminate the connection to the FTP
server without exiting FTP client view
close
Optional
Equal to the disconnect
command.
Terminate the connection to the FTP
server and return to user view
bye Optional
Terminate the connection to the FTP
server and return to user view
quit
Optional
Available in FTP client view,
equal to the
bye command.