H3C S5810 Series, Руководство по эксплуатации

Страница: 636 / 820

1-9
To do… Use the command… Remarks
Display the power state of a
device
display power [ power - id ] Available in any view
Display the reboot type of a
device
display reboot-type Available in any view
Display the reboot time of a
device
display schedule reboot Available in any view
Display detailed configurations
of the scheduled automatic
execution function
display schedule job Available in any view
Display the exception handling
method
display system-failure Available in any view
Device Management Configuration Examples
Remote Scheduled Automatic Upgrade Configuration Example
Network requirement
z
As shown in Figure 1-2 , the current software version is soft-version1 for Device. Upgrade the
software version of Device to soft-version2 and configuration file to new-config at a time when
few services are processed (for example, at 3 am) through remote operations.
z
The latest application soft-version2.bin and the latest configuration file new-config.cfg are both
saved under the aaa directory of the FTP server.
z
The IP address of Device is 1.1.1.1/24, the IP address of the FTP server is 2.2.2.2/24, and the FTP
server is reachable.
z
User can log in to Device via Telnet and a route exists between User and Device.
Figure 1-2 Network diagram for remote scheduled automatic upgrade
FTP client
FTP server
User
Telnet
Device
1.1.1.1/24
2.2.2.2/24
Internet
Configuration procedure
1) Configuration on the FTP server (Note that configurations may vary with different types of servers)