H3C S5810 Series, Руководство по эксплуатации

Страница: 478 / 820

2-19
Figure 1-9 SSH client configuration interface 2)
In the window shown in Figure 1-9 , click Open . If the connection is normal, you will be prompted to enter
the username. After entering the correct username ( client002 ), you can enter the configuration
interface.
SSH Client Configuration Examples
When Switch Acts as Client for Password Authentication
Network requirements
z
As shown in Figure 1-10 , Switch A (the SSH client) needs to log into Switch B (the SSH server)
through the SSH protocol.
z
The username of the SSH client is client001 and the password is aabbcc . Password
authentication is required.
Figure 1-10 Switch acts as client for password authentication
Configuration procedure
1) Configure the SSH server
# Create RSA and DSA key pairs and enable the SSH server.
<SwitchB> system-view
[SwitchB] public-key local create rsa